by Toglefritz | May 23, 2018 | 3D Printing, Particle, Robotics
by Toglefritz | Oct 2, 2017 | 3D Printing, Fusion 360
Convert a Complex STL into a Body in Fusion 360 Almost daily technology blogs features stories about advances in the field of desktop 3D printing. New techniques and technologies, not to mention new 3D printers, are constantly being developed. But one of the most...
by Toglefritz | Jul 28, 2017 | 3D Printing, Fusion 360
Convert a Simple STL into a Body in Fusion 360 If you are interested in 3D printing and follow news on the subject, you will hear almost daily about advances in the sophistication and capabilities of hobby and semi-professional 3D printers. New 3D printing techniques...
by Toglefritz | Sep 18, 2016 | 3D Printing
How to Run Octoprint on a Raspberry Pi Zero Introduction Using Octoprint running on a Raspberry Pi 2 or 3 is a setup many Makers have to enable remote use and monitoring of their 3D printer. I have been running Octoprint on a Raspberry Pi 2 for quite a while because I...
by Toglefritz | Sep 12, 2016 | 3D Printing
A Bit About the E3D Titan What is the E3D Titan? The E3D Titan is an innovative extruder from 3D printer part manufacturer, E3D. The Titan extruder features a compact and light-weight design that manages to squeeze a 3:1 geared drive mechanism into basically the same...
by Toglefritz | Jun 24, 2016 | 3D Printing
The Ultimate Guide to Customizing Cura Chapter 1: Introduction If you’ve spent much time at all working with 3D printing technology, you’ve almost certainly heard of Cura. Cura is 3D printing host software created by David Braam. The software is currently...
