by Toglefritz | Jul 27, 2015 | 3D Printing
Types of Endstops 3D printers are extremely accurate and precise positioning systems, but the way 3D printers track their position is different than many people think. The way a 3D printer controller tracks the position of the print head is much different than how a...
by Toglefritz | Jul 17, 2015 | 3D Printing
Bearings vs. Bushings The previous post discussed the two dominant types of linear motion systems used in 3D printers: lead screws and belt drives. These are the systems that actually move the build platform and/or extruder. Lead screws and timing belts are used to...
by Toglefritz | Jul 15, 2015 | 3D Printing
3D Printer Linear Motion Systems Needless to say, a 3D printer’s linear motion system is one of the most important of the many mechanisms that make up a 3D printer. The linear motion system on a 3D printer is used to move the hot end and/or built platform along...
by Toglefritz | Jul 14, 2015 | 3D Printing
3D Printer Frame Design Every part of designing a 3D printer is fascinating, from the linear motion system, to the electronic circuitry, to the software, designing a 3D printer offers Makers the opportunity to explore a wide range of technological areas and skills....
by Toglefritz | May 24, 2015 | Black Tie Aerial
Selecting a Camera for FPV Many parts go into an FPV system: a video transmitter, a video receiver, a viewing device, an optional on-screen display device, two different power sources, two different electrical systems, and, of course, a camera. Of all the parts on...
by Toglefritz | Apr 11, 2015 | 3D Printing
The Formlabs Form 1+ is capable of printing parts in three layer thicknesses: 0.1mm, 0.05mm, or 0.025mm. There are benefits and drawbacks to each of these layer thicknesses and each has its own applications. This page compares the extremes of the Form 1+’s...
